Required Information and Options for Mounts Only
Phone number (for shipping document).
Primary e-mail address.
I do not have dimensions ready, or would like to discuss them. Please e-mail me for them.
If your telescope tube has end rings (tube is wider at the ends), please enter the diameter.
Circumference of the telescope tube (a cloth tape measure works great for circumference).
Distance between side walls, if you have an existing mount.
Telescope tube balance point - measure from the center of the altitude bearing to the back edge of the tube (or collimation knobs if protruding) with your heaviest eyepiece in the focuser and finders on the tube.
Altitude bearings diameter and distance from tube wall to outside contacts with the mount.